|
Fume Hood are manufactured according to American Design Standard: ASHRAE 110: 1995 & European Design Standard: EN-14175. We have offered 3 modules for Fume Hood, 4’, 5’, & 6’. The exterior construction is powder coated durable (70 – 80 microns), 1.5mm & 1.2mm heavy duty CRCA (as per IS: 513) sheets with rigid. The interior construction is chemical & heat resistant, 6mm
thick Polypropylene, smooth finish.
The working top is of 18-20mm Jet Black Granite. Worktop is provided with 100mm x
200mm sink for drainage with water tap. Fitted with Level adjusting screws to adjust Fume Hood level by + 10mm. Air Flow Monitor (Optional) is an accessory for Fume Hood. This is to indicate the approx. face velocity of airflow.
Air Flow can be regulated by ‘Flow Control Value’. The Noise Level is < 70db at 1 meter from the Fume Hood. An Apparatus Holding Grid (optional) can be provided which is made of Duralumin rod (Dia. 12.7 mm) to hold the apparatus. Chemical Storage Base Cabinet can optionaly be provided.
Fume Hoods are constructed double walled which provides access to services like
Electricity, Gas & Water. We use high quality HDPE/PPGL/FRP/PP/PVC pipes for FC ducting.
We are using Silent PP + FRP high efficiency centrifugal blower for exhaust
system. This is heat & chemical resistant PP + FRP blower with aerodynamically balanced impeller. Air Suction Capacity of the blower is 800 CFM confirming to international face velocity norms. Motor fitted is 1HP (3 Phase), direct drive, continuous rating as per IS 325 we prefer cromption.
|
Products 
